| TEXTURED LINER
Poly-America offers High Density Polyethylene (HDPE) and Linear Low Density Polyethylene (LLDPE) blown-film textured geomembranes with smooth edges. These products are offered in thicknesses of 0.75, 1.0, 1.5, 2.0 and 2.5 mm (30, 40, 60, 80 and 100 mils). Rolls are 23 feet wide and vary in length depending on the thickness of the geomembrane.
Our blown-film textured liners have smooth edges and are covered by U.S. Patent Nos. 5,763,047 and 5,804,112. The blown-film texturing provides increased friction angles for higher stability on steep slope applications. Additionally, the smooth edges result in easier, more cost-effective, more consistent, and better welding.
|
Features:
High Coefficient of Friction - Poly-Flex® blown film textured liners provide increased friction angles for higher stability on steep slope applications. This increased friction significantly reduces slippage, allowing for design flexibility and greater capacity.
High Quality Seaming - The smooth edges result in improved weld integrity and ensure the same high quality welds achieved with smooth geomembranes.
Reflective Factor - Poly-Flex® textured geomembranes come in white as well as black. A white surface helps mitigate liner temperature extremes and aids visual inspection. |
|
Applications:
• Landfill (primary & secondary containment)
• Landfill caps / closures
• Lagoon Liners
• Mining Heap Leach Pads
• Pond Liners
• Agriculture Pond Liners
• Canal linings
• Raw water treatment reservoirs
• Potable water reservoirs
• Retention ponds
• Floating Covers
• Secondary containment for above ground
storage tanks
• Solutions ponds for mining applications
• Tank linings
• Waste water treatment lagoon
|
